Select a Station in Your Network

When you perform a configuration via TCP/IP or a configuration via H1 the Select a Station in Your Network window opens.

All stations with an arrow (->) at the beginning of the row are currently online in the network. They are detected automatically by configuration. The software displays all devices and PCs  with servers.

NOTE:

Stations connected behind a router cannot be discovered automatically. For these, you need to define a direct connection using the New button.

Selecting the desired station

When you double-click the desired station (or click the OK button), configuration will connect to the corresponding station. The connection attempt has a timeout of about 3 seconds.

Successful connection: the Connections main window opens.

Unsuccessful connection: If there is no reply from the station within 3 seconds, the connection attempt aborts.

New Station

If the station is not listed in the automatic online display (parameterization via IP) because it is located outside your network, you can click this button to configure a direct connection to this station in the Edit Access to a Station in Your List.

Edit

Using this button, you can change the parameters for the station you created using the Edit Access to a Station in Your List dialog box.

Delete Station

Using this button, you can delete the parameters for the station. A prompt asks you to confirm that you really want to delete the parameters. Deletions cannot be undone.

Rescan stations [Network Adapter]

Starts the station scan and the automatic discovery of online stations and servers. This scan will only find stations that are accessible in the local network.

Settings

The dialog Configuration Adapter Settings allows you to setup the network card and the timing.

Language

The dialog allows you to toggle the space of the configuration.