Tani Configuration

configuration is required to configure the devices. The software is used to make basic settings, create and diagnose connections and display data recorded by the Logger feature. To configure configuration for a device, use one of the following methods:

Configuration via TCP/IP

A socket connection to the device is established via TCP/IP. Any entries you make are transmitted directly to the device and stored there. This method allows you to configure the device from anywhere within the TCP/IP network.

Configuration via H1

A configuration via H1 is only possible if the H1 protocol driver is installed. An H1 connection is established to the device you want to configure. Any entries you make are transmitted directly to the station and stored there. This method allows you to configure the station from anywhere within the H1 network.

Offline configuration

You can create a configuration file offline on the PC and transfer it to the device. This is not the common way of configuration. It is recommended to configure the device online until everything works properly. Then, transfer the parameters from the device to the PC and save them there.

Language selection (buttons)

Use the buttons to select the desired user interface language. After a restart, configuration will display all texts in the selected language. Please note that this does not toggle the texts displayed in the Logger.