• New: Mitsubishi Melsec Q family support.
• OPC UA device search with multicast discovery.
• Siemens S7 1500 now with the usage of "Optimized Data Blocks" and online browsing.
• Option network redundancy
• Short orientation time because all controller types are handled in the same way
• Easy configuration, many wizards, no reboots during configuration changes
• Reduced commission with OPC UA and OPCPipe avoiding DCOM effects
• Reduction of downtime through integrated diagnostics

At a glance

The Tani OPC Server supports the functions You will need. The Ethernet protocol You are using depends from the controllers and devices in Your plant. So this one service communicates with all the controllers.

Features

• No limit to the number of controllers and variables. Depending on the license limitations may exist.
• High degree of reliability for all OPC clients using OPC UA and DA.
• Redundancy for secure communication to the controllers
• S7 1500 and 1200: Online browse and "optimized data blocks".
• S7 200/300/400: Easy to use Step 7 symbols directly from the Step 7 project.
• All configurations take effect immediately without annoying reboots or restarts.
• Handles data from other OPC devices and servers comfortable with integrated OPC UA Client
• Increased availability with extensive diagnostics. Contains a logger for diagnostics, for long time diagnostics also.
• The Windows and Linux versions (Raspberry also) are same in all functions, DCOM alone can be used under Windows.
• 72 hour version with unlimited functionality available here.
• Standard version for 50 controllers and 10000 items.

Application area

"All in one" OPC Server with maximum protocol and controller scope for various controller types and OPC variants and operation systems

The Tani OPC servers are made for heterogeneous networks with different controllers and devices from lot of different vendors. With the extensive diagnostics for easily commissioning it replaces lot of other OPC servers.

Tani offers OPC Server for the Raspberry PI, Odroid, PC Linux, Windows, and more.

Supported operation systems	Windows 7, 8, 8.1, 10 (all versions). Older versions as XP and Vista also. 64 and 32 bit. Windows Server 2008, 2012, 2016 and 2018. Linux on the Raspberry and Odroid computers (64 and 32 bit). Linux on many Phytec devices. Linux on the Wiesemann & Theis pure.box 3, pure.box 5. Linux on a PC with Debian, Ubuntu, Suse, Arch, Centos, Redhat and other Distributions. Linux 64 Bit as Docker or Kubernetes Container.
Supported OPC interfaces	OPC Pipe Open interface OPC UA (Unified Architecture) OPC DA (Classic OPC over DCOM, available under Windows only)
Supported controller types and devices	Siemens S7 1200 and 1500 family. The optimized data blocks are supported, all symbols and comments are browsed online. Siemens S7 over RFC1006 and Sinec H1. Supported are S7 200, 300 and 400, Logo 8. Siemens CP or the Ethernet interface onboard the CPU can be used. Mainstream MPI Gateways as Hilscher Netlink, Helmholz Netlink, IBH Softec Netlink, INAT Echolink, Process Informatik S7Lan or Softing Netlink are supported, too. S7 compatible systems as VIPA Speed7 can be used, too. Siemens S5 over RFC1006, PLC Header, RAW or Sinec H1. Supported are Siemens CPs, INAT CPs, Helmholz CPs, IBH Softec S5Net, Process Informatik S5Lan. Rockwell Compact Logix and Control Logix, all firmware versions. Rockwell Micro 8 series as the 800, 810. Mitsubishi Melsec Q family. BACnet devices. BACnet is common used in building automation Devices using the Modbus TCP protocol. Modicon Schneider Wago Beckhoff Phoenix Contact Omron B&R Fanuc ABB All systems and devices which can be accessed with OPC UA or Classic OPC. Raw data. Communicates via Ethernet.

PLC protocols supported by Tani OPC-Server

		Basis	Siemens	Rockwell	Mitsubishi	BACnet	De Luxe	De Luxe H1
Transport- protocols	TCP/IP	✔	✔	✔	✔	✔	✔	✔
	OSI/H1							✔
Application- protocols	Siemens S7 Siemens S5		✔				✔	✔
	ControlLogix CompactLogix			✔			✔	✔
	Mitsubishi				✔		✔	✔
	BACnet					✔	✔	✔
	Modbus	✔	✔	✔	✔	✔	✔	✔
	Send / Receive	✔	✔	✔	✔	✔	✔	✔
	DCOM Tunnel	✔	✔	✔	✔	✔	✔	✔

Order Numbers

Opc Server Standard Siemens, 50 connections 10000 items	101-0011-01
Opc Server Standard Rockwell, 50 connections, 10000 items	101-0021-01
Opc Server Standard Mitsubishi, 50 connections 10000 items	101-0051-01
Opc Server De Luxe H1, 100 connections, 100000 items	101-0041-01
Opc Server Standard Basis, 50 connections, 10000 items	101-0001-01
Opc Server De Luxe, 50 connections, 10000 Items	101-0031-01
Opc Server Tunnel	101-0000-01
Opc Server Minimum Siemens, 1 connection, 1000 items	101-0111-01
Opc Server Minimum Rockwell, 2 connections, 1000 items	101-0121-01
Opc Server Small Siemens, 5 connections, 3000 items	101-0311-01
Opc Server Small Rockwell, 5 connections, 3000 items	101-0321-01
Expands Standard OPC Server or Standard PLC Engine with controller Redundancy	100-0001-01
Expands Standard OPC Server or Standard PLC Engine to 1000 connections	100-0001-02
Expands Standard OPC Server or Standard PLC Engine to 100 000 (hundred thousand) items	101-0001-06
Expands Standard OPC Server or Standard PLC Engine to 200 connections and 1 000 000 (one million) items	101-0001-02
Expands standard OPC Server or standard PLC Engine with OPC DA client	100-0001-03
Expands Standard OPC Server or Standard PLC Engine to BACnet IP Access	100-0001-04
Expands Standard OPC Server or Standard PLC Engine to Serial Access	100-0001-05
Expands Standard OPC Server or Standard PLC Engine to create variables dynamic	101-0001-04
Upgrade OPC Server to PLC Engine	101-0001-07
Expands Standard OPC Server or Standard PLC Engine to read PLC program code	101-0001-03

Software protection with dongle

OPC Server download

Without a license all OPC Servers will work for three days after each start.